welding supplies shop UK by WeldingSuppliesDirect: Welding of metals causes the generation of fume and fine particles harmful to health. If this fume and fine particles cannot be discharged from the working environment correctly, it causes an unhealthy working environment. Unhealthy work environments lead to production losses, inefficiencies, and employee unrest. Companies, which do not increase precautions against occupational accidents and diseases are experiencing a shortage of qualified personnel and face lawsuits with serious consequences in the long term because of the increased awareness in recent years. Companies that take precautions against work accidents and occupational diseases at the highest level have increased productivity thanks to employee satisfaction as well as providing a sustainable production center. Discover extra information on Laser welder.
Ensuring your workshop, facility, or welding shop has proper fume ventilation can be a daunting process. This guide to fume extraction systems will help you understand more about regulatory requirements, benefits of fume exhaust systems, types of fume ventilation systems, and some important considerations when selecting a fume extraction or fume exhaust system. Local exhaust systems remove aerial contaminants at or near the source. This offers some of the greatest protection as toxic elements are captured before they can mix with a worker’s breathing zone. This is the preferred method of fume removal if the fumes are a serious health risk, heating and cooling costs are a concern, and if there are a limited number of emission sources.
If you’re looking for a welder for home use, and you don’t necessarily need something you can take with you to local manufacturing jobs, then the Wolf MIG combination welder is a good place to start. Far from just another “simple” welder, the Wolf MIG comes with a changable wire speed and a range of fantastic features included, as well as the ability to switch easily between non-gas and gas-based welding. There are no tools required to switch to a non-gas weld, which is great if you’re in a hurry. Another positive feature of this home welder is the fact that it comes with all the additional accessories that you need to get started like a spool of flux cored wire and a wire brush. The 140 welder’s non-live torch is very simple and lightweight to use, with 6 different power settings to choose from. Additionally, the fully-variable wire speed control means that you can adjust your performance to suit the work you’re doing. If you’ve never worked with a DC or MIG car welder before, then you’re sure to be impressed with the performance of this high-quality welding machine. The inbuilt turbofan system also allows for high-quality extended welding cycles.
The overall temperature of the materials will vary depending on the kind of fusion as well. Arc welding, harnessing the power of lightning, produces very high temperatures. Depending on the metals being fused, this temperature can range anywhere from 2,000 to 3,500 Celsius and, in some cases, even higher. Brazing is a lower temperature application and, as it doesn’t melt the base materials, keeps heat just high enough to melt the filler and flux being used. This is generally in the range of 600 degrees C. Soldering needs even less heat. The melting point of solder is generally in the range of 90 to 450 C, and many soldering irons are generally set to the 300–350-degree range.
Staying informed about and compliant with local and national safety regulations is critical for any welding operation. This includes following guidelines set by occupational safety and health administrations and other relevant authorities. Compliance ensures that welding operations meet legal standards, which helps protect businesses from legal liabilities and fines, and more importantly, ensures a safe working environment for all employees. For those interested in deepening their knowledge of welding safety, resources such as the American Welding Society (AWS) website and safety publications can provide valuable information and updates.
Plasma welding is one of the cleanest welding techniques since the highly concentrated heat creates a narrow bead, which results in minimal spatter. It’s perfect for applications such as aerospace manufacturing that require pinpoint precision. Plasma welding is one of the most sought automated welding processes since it operates at low running costs while providing accurate and neat welds. Submerged arc welding (SAW) works similarly to SMAW, which protects the weld metal by using flux. The welding technology behind this automatic or semiautomatic welding process uses a separate flux hopper that deposits granular filler metal to the weld. This welding technique creates stable and clean welds, which makes it better than most conventional manual welding processes. It’s an excellent choice for metals such as nickel, steel, and stainless steel and is often used for manufacturing pipes, pressure vessels and boilers.
This drill, though not quite as advanced as our top pick, will be an excellent addition to your arsenal. It is a lightweight mag drill that comes with a swivel base magnet, making it easy to use during horizontal or overhead jobs. The HMD904S has a powerful 7.2A motor and you can drill holes with a diameter of up to 1.5” and up to 2” deep. This drill is incredibly versatile and features a two-stage magnet that increases power by up to 30%. The drill is also fitted with a pilot light, making it possible to do accurate work, even in conditions with inadequate lighting. For added convenience and accuracy, the drill is fitted with a slot drive arbor, making it quicker to change out accessories. This drill is designed for industrial and heavy-duty applications. You will be able to drill thousands of holes with no problems whatsoever. As a versatile tool, this drill is perfect for the casual handyman as well as the professional steelworker.
Several tips on welding equipment, MIG and TIG welders, plasma cutters. ARC Welding : ARC welding is one of the oldest welding processes around. It uses either an AC or DC power supply to create an electric arc between the welding rod and the workpiece metal to melt the metals and join them together. This style of welding is relatively inexpensive and very portable but it does require some practice to get good consistent welds and the welds will probably require some arc weldercleaning up afterwards. ARC welding is less suited to welding thinner materials but there is a large range of specialist electrodes (welding rods) available for ARC welders depending on what materials you are welding. ARC welding is versatile but more suited to heavier applications.
The X-Tractor from Lincoln has a “Mini” in it, which is self-explanatory. The machine isn’t as heavy-duty as most welding fume extractors, but no other device can beat the X-Tractor Mini in terms of portability. The X-Tractor Mini is compact and extremely lightweight. You can just pick it up and set it anywhere you like, from your garage to a store. But, the lighter weight doesn’t compromise efficiency. 2 Different Airflow Settings and 2.4 HP Motor This portable weld fume extractor comes with 2 different settings to choose the preferred airflow. The lower one will generate 95 cubic feet per minute, and the higher one will generate 108 cubic feet of airflow per minute. The amount of airflow seemed a little less to me, but you can’t expect more from a 2.4 HP motor. Besides, the size of the machine speaks for itself that it’s highly portable, which requires a bit of compromising on the power’s end.
The story of ESAB is the story of welding. When our founder Oscar Kjellberg developed the world’s first coated welding electrode in 1904, he launched a company whose innovation and uncompromising standards have helped create the history of welding itself. For more than 100 years, ESAB has been powered by the will to continuously seek new and improved ways of serving our customers. This has made ESAB a world leader in welding products and advanced cutting systems. In 2012, ESAB was acquired by Colfax Corporation, one of the world’s leading diversified industrial manufacturing companies. Colfax, like ESAB, is a solidly customer-focused company that places strong emphasis on constant innovation and improvement. From the firsts by our founder to our global growth, we take pride in what we’ve accomplished in more than a century. But we do so with a keen eye on the future. What can we do better? It’s only when we seek to build upon all we’ve learned, to perfect the innovations our customers count on to work confidently, and push ourselves and our company further that we can boldly face the future. This is how we continue to write the history of welding and cutting. At the end of the day, it’s not where you’ve been that matters most – it’s where you’re going. And for us, that’s forward.
Welding Supplies Direct are the UK distributor for GPPH welding tables, manufactured to the highest standards in Europe. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. Our modular welding benches come equipped with a hole system of all sides (tabletop & all sides); the holes are 28MM in diameter and have a chamfered edge for easy tool assembly. You have the option of standard legs or castors being fitted, too.
United Kingdom market pick: LOTOS Technology is a California company that has only been around since 2007. Still, the LOTOS MIG is impactful and high quality enough to make it onto our list. This one is a versatile machine that is a fair price of about $400. And—provided that you have the necessary 240-volt outlet in your home—it can be set up in a matter of minutes. The duty cycle of this welding newcomer is impressive, and it can be utilized by pros and amateurs who have been continually impressed by the bang they’ve gotten for their buck. The LOTOS can weld steel and stainless steel from 18 gauge to ¼ inches and aluminum to 1/8 inch or thicker. Thermal overload protection doesn’t let this machine overheat, and infinitely adjustable heat/amperage as well as wire speed makes using the LOTOS simple. Check out the LOTOS MIG140 for a lower power alternative.
Another quality machine from Hobart that has 25A for 190A output range so you can weld up to 5/16 in steel. The power input is only 230V so you won’t be able to use this on your standard household power outlet. The 190 is a wise choice if you’re considering buying a 140A welder but think you may want to upgrade in the future. It’s not much more expensive and you can always turn the 190 down but you can’t turn a 140 up. There’s loads including for the price, you get power, durability, a good duty cycle and all the extras you need to get started, including .030 contact tips, 0.30 flux cored wire and gas gauges. See the full review here. Read extra details on this website.
Gasless welding, which is also called “Gasless” or “No-Gas” welding, is the main convenience of contemporary MIG welders. That means they can make welds either with or without gas. It is possible thanks to the use of a special tubular wire filled with a flux and metal powder called a flux-cored wire. In a nutshell, when a flux-cored wire is used, its components generate a shielding gas under a high temperature that is essential for a high-quality joint. The thermal overload protection is also a useful feature that will switch the unit off automatically if the temperature reaches a certain level. Surely, a MIG welder is not something you will carry every minute. Yet, if a machine is lightweight and fitted with wheels, using it will be much more pleasurable. Finally, pay attention to the kit each tool comes with. Some models include a welding shield, coil, attachment for flux-cored welding, hammer, or brush. So, take these features into account when buying a welder.
Industrial gas cylinders have been around for a long time. They are widely used for welding, medical applications, fermenting liquids, and several other applications across various industries. In addition to these, new applications for these cylinders are emerging, as new industries and technologies are evolving. These cylinders are filled with low molecular weight chemicals in a gaseous form. Acetylene, oxygen, nitrogen, carbon dioxide, hydrogen, argon, and helium are some gases, which are used regularly. These chemical gases have distinct properties, which are exploited in various industrial applications. If not handled properly, these industrial gas cylinders may be hazardous in various industrial conditions. This post shares some important safety tips for handling industrial gas cylinders in an industrial facility.
Whether you’re a professional contractor or a DIY enthusiast and looking for a metal-cutting tool, this disc is a must-have. The cutting wheel is a great way to quickly cut through metal. With 52 wheels, you’ll always have one on hand. It is compatible with all 4-1/2 inch (115mm) angle grinders with 7/8 inch (22.2mm) arbor. The thickness of the wheel is 0.045 inch (1.2mm). You can operate this up to 13,300 RPM When it comes to precision and burr-free cutting, the Truswe Metal and Stainless Steel Cutting Wheel for Angle Grinder is tough to beat. This ultra-thin design delivers fast and accurate performance, with minimal material loss. The Metal Cutting Discs are made of aluminum oxide grains which are more safe than other wheel types. These discs should only be used when wearing all applicable safety gear because they can fly off the wheel and injure you if not careful. You should read the instructions before using this power tool. It is a heavy duty cutting disc that is fitted to any angle or side grinder. It will cut with ease through sheet metal, plastics, fiberglass, Plexiglas, ceramic tiles and even rubber.
The Everlast Powermig 200 welder offers dual voltage inputs and weighs only 35 pounds due to inverter technology. It’s not only MIG-capable, you can also use it for flux core welding or as a stick welder. When your machine can stick weld and connect gas at the same time, all you need to buy is a connector block and you gain TIG ability too, although Everlast doesn’t say so. The Powermig 200 features a burn back control, automatically adjusting the wire length at restart. 200 amps can weld ?-inch steel in a single pass. Dual digital displays and a low-spatter arc control system are nice features in this price range. Preflow and Postflow improves weld quality, reducing porosity by starting the gas shield before the arc begins and cutting the gas off after the arc stops. The burn back control feature resets the length of the wire feed before you strike another arc. Another nice feature is the digital controls that give you a nice reading of exactly what your voltage and wire speed is. Everlast includes a gas regulator with this rig and backs it with a 3-year warranty. With stick capability and the ability to use it on either household or industrial power, this is quite a bit of welder for the money.
Look for ways to create more efficiencies in the welding process. This includes examining such things as wire diameter, wire feed speed, voltage, travel speed, gas type, transfer mode, etc. For instance, if the shop is currently welding with a short arc process and a 75/25 blend of shielding gas, it may be more effective to switch to a different gas and a spray mode of transfer. Or, a change in process may be warranted based on the condition of the part. If there is oxide on the part, it may be easier to change to a process that will overcome contamination problems rather than try to clean each part before welding. Your welding supplier should be up to date on the latest technology and be able to advise you on new processes, machinery and consumables that can optimize welding at the shop. In some cases, it may be better to double bevel a joint to prepare it for welding rather than single bevel it. It is recommended to double bevel any material that is more than 3/4″ in thickness. Just this simple change in procedure can save quite a bit in weld metal. On a 3/4″ thick piece, a double bevel will use 1.45 lbs. per foot of weld metal while a single bevel will use 1.95 lbs. per foot.
How to pick a welder tips: Stepped voltage or synergic: Synergic MIG’s have the edge when you’re welding stainless & aluminium as they are pre-programmed, easy to set up & portable. They also provide a better weld characteristic and so give cleaner weld bead with less/no spatter. Inverters: Considerably smaller and lighter and so ideal for site work. All inverters are stepless and so have infinite control. Also cheaper to run power wise. Budget: How much welding are you going to undertake? Gear your purchasing decision around the jobs you will be working on the most. Polarity changeover; A lot of welders at the light industrial end will to be able weld with gasless flux cored MIG wire. Is the switchover easy on the machine you’re considering. Availability of spares & after sales service: Ask where the machine is actually made. Even the more recognised brands largely outsource their production, which can lead to quality and after sales issues with lack of continuity of supply for spares.
The sort of build quality that you’d expect from Makita. This angle grinder is tough, well put together and built to take a beating. Makita have included a lock-off power switch. I’m a big fan of these compared to the “deadman” style switch you need to hold to keep the disc spinning. They can tire your hand out quickly and aren’t ideal for long grinding sessions. You get a 2.5m power cable to play with. It’s long enough for most grinding jobs, and the quality of the power cord is excellent as well. Makita use labyrinth rings to seal the bearings against dust. Anyone who uses angle grinders a lot know how much dust they produce, so this is a welcome feature. Attaching the side handle can be a bit of a pain. You’ll need a long screwdriver to hold the bolt in place inside the handle. Compared to simple screw-in handle on the Bosch GWS 7-115, this one can be tricky.
Auto-darkening screens use a combination of light-sensing technology and auto-darkening LCD screens that modulate based on the light coming in. They can react nearly instantly to an arc and clear up almost as quickly when the arc is over, so they’re very reactive to your operations. The downside, of course, is that these are much more expensive (and tend to have smaller viewports) than fixed-darkening shades. Auto-darkening helmets have a “reaction time” measurement as well. This can be measured in fractions of a second, 1/3600th to 1/25000th of a second; the faster the reaction, the better. The longer it takes to transition, the more harmful light makes it to your eyes, and the more damage can build up over time.