Electronic supplies info details info database from easybom.com? Nowadays, Wi-Fi devices are ubiquitous in our lives. Casually open the home wireless routing management interface, there may be no less than 10 Wi-Fi devices online at the same time. The increase in the number of devices leads to network congestion, performance degradation, increased delay and other problems. These problems became more serious in the era of Wi-Fi 5 (802.11 ac). Therefore, when designing Wi-Fi 6 (802.11 ax), experts made improvements and innovations specifically for the problem of network congestion. So, what new technologies does Wi-Fi 6 use to improve wireless channel capacity? When the user equipment receives the AP signal, it will compare whether the color it receives is consistent with the current associated AP color. When the color is the same, the user will think that the signal is the signal in the cell. If the color of the received signal is different from that of the associated AP, the user determines that the signal belongs to the interference signal. As shown in the following figure, due to the use of different color codes, the channel 1 of the green cell is no longer interfered by the adjacent cell channel 1 (blue and red). Discover more info at https://www.easybom.com/p/mf11503k-nanjing-shiheng-elec-20852158.

With the increasing degree of automation of cars and electric vehicles, the number of semiconductors required will increase sharply. Most semiconductors are traditional analog and power semiconductors. These traditional analog and power semiconductors are produced by 8-inch factories. Because it is difficult to ensure 8-inch manufacturing equipment, it is difficult to add new 8-inch semiconductor factories. In short, self-driving cars certainly need state-of-the-art semiconductors to run advanced artificial intelligence (AI), but the need for a large number of traditional analog and power semiconductors has become the Achilles’ heel of automobile production, and it is not easy to solve this problem. Although the automobile industry has ushered in an once-in-a-century period of great change in CASE (Connected, Autonomous/Automated, Shared, Electric), it is also an era suffering from the shortage of semiconductors.

In the early CPUs, the chip integration level was very low. The CPU was a single chip. It only integrated an arithmetic unit and a controller. It could only calculate and control. At this time, the internal capacity of the CPU was useless. Memory, the CPU left The memory cannot be calculated. Back then, there was no memory in the CPU because the memory could not be integrated, and others such as the serial port could not be integrated, so there was only a single CPU. If you need to use the serial port, you need to use a serial port controller chip outside the CPU. The PCB traces are connected to the CPU, and then the entire PCB board is composed of the CPU, and these peripheral chips is called a system board. This system board can communicate with another system board. The CPU communicates with another system through its serial port controller. The serial port controller on the board communicates, and functions such as the serial port controller cannot be integrated into the CPU chip. For example, if the LCD is also used here, it is necessary to add an LCD controller chip to the periphery and connect it to the CPU through wiring. A whole board composed of these chips is called a system board. These UART controllers and LCD controllers are called peripherals. Combining them with the CPU on one board is the function implemented by a current K60 chip, but they are integrated into a small chip. The peripherals here refer to the inside of the system board, the peripherals outside the CPU are called peripherals, the CPU is called the internals, and there are only arithmetic units and controllers inside, which are called internals.

We aspire to make Easybom be the most intelligent information aggregation platform. We boast the latest big data technology and accumulate billions of market data. Consequently, we can update in time and analyze the data in real time so as to make the prices more exact and transparent. Moreover, we can analyze inventory risk index, supplier integrity index and price risk index which can reflect the market, so that you can follow the market trend in time and find the suppliers and products which you satisfy most. Easybom is driven by data which create numerous business chances. Easybom provides intelligent data analysis to enhance your insight into the market. It focuses on the market as well as your need.

Insights: The best and most profitable strategy is to gain insights from our unique perspective as a magnificent electronics component search engine. Integrated Experiences: We offer a trusted range of tools to give your customers a better experience with your product or service. Optimized Price: According to each customer’s quotation, accurately evaluate the customer’s purchase and quotation history, and automatically recommend the best pricing for a single part for customers based on multiple factors. See extra information on electronic component.