Premium roller bearing supplier? Released on December 20, 1984 of the People’s Republic of China machinery industry standard: JB / 2300-84 the rotary bearing type, basic parameters and technical requirements, composed mainly of machinery and electronics industry of tianjin engineering machinery research institute, xuzhou hering slewing bearing factory is responsible for drafting, the country then issued standard of construction machinery in 1991: JB36.1-36.3-91, released in 1999 and 2011 successively new machinery industry standard JB / 2300-1999 and JB / 2300-2011. Slewing bearing, is a kind of comprehensive load to bear a large bearings, can withstand the larger axial and radial load and tilting moment. See more information at custom bearing manufacturer.

Joint bearing is a kind of spherical sliding bearing, the sliding contact surface is an inner spherical surface and an outer sphere, rotary oscillation motion can be in any Angle, it USES the surface phosphating, Fried, padded, spraying and other special craft processing method.Joint bearing with large load capacity, impact resistance, corrosion resistance, wear resistance, from the heart, good lubrication, etc. Joint bearing structure than the rolling bearing is simple, its mainly by a spherical within the inner ring and a spherical outer ring.Joint bearing is generally used in low speed of the swinging motion (that is, the angular motion), due to the sliding surface of spherical shape, can be tilted movement in certain Angle range (that is, the heart movement), the supporting shaft and the shaft shell hole concentricity is bigger, can still work normally.

Waxing Bearing focuses on providing a variety of roller bearing for customers.Good materials, advanced production technology, and fine manufacturing techniques are used in the production of roller bearing. It is of fine workmanship and good quality and is well sold in the domestic market.Waxing Bearing is dedicated to providing considerate services based on customer demand. Waxing Bearing focuses on providing a variety of bearing for customers.Waxing Bearing has professional production workshops and great production technology. bearing we produce, in line with the national quality inspection standards, has reasonable structure, stable performance, good safety, and high reliability. It is also available in a wide range of types and specifications. Customers’ diverse needs can be fully fulfilled.

Entity one-way bearing used GCr15 bearing steel, after heat treatment hardness in HRC61-65, bearing small volume and high bearing capacity, have enough storage space of the grease, but have long come lubrication interval. Powder metallurgy one-way bearing and the real driving force to the shaft in one-way bearings can be completely when the “lock”, to avoid the traditional stamping outer ring one-way bearing “lock” the problem of insufficient performance. Main use: textile machinery;Printing machinery;The automotive industry;Household appliances;Self-checkout counters. HF series: one-way needle bearing is composed of stamping outer ring and plastic cage, cage can bring plastic reed can also on stainless steel reed guided needle, cant on the outer ring raceway and roller as a locking device.HFL (clutch and bearing components) : support bearing installed at both sides of the needle roller clutch and bear radial load, as a support bearing is needle and plastic cage components.Since there is no inner ring, wear of shaft is bigger, so the use of shaft is best for heat treatment. Read more details on https://www.wxingbearing.com/.

An pillow block bearing is a bearing unit that combines a rolling bearing with a bearing housing. Most of the outer spherical bearings are made of spherical surfaces and are mounted together with imported bearing housings with spherical inner holes. The structure is diverse, versatile and interchangeable. At the same time, these pillow block bearings are also designed with a certain degree of self-alignment, easy to install, and have a double-structured sealing device that can work in harsh environments. The bearing housing is typically cast. Commonly used seats are vertical seat (P), square seat (F), boss square seat (FS), boss circular seat (FC), diamond seat (FL), ring seat (C), slider seat, etc. T).

In the initial development stage of self-lubricating bearings, China’s bearing research and development team can only find useful knowledge from related books over and over again. He Liangjia himself also tried his best to actually experience and understand the practical applications related to it. In this regard, He Liangjia has traveled to weaving factories and other places many times to teach himself fabric structure design, manufacturing technology, adhesive and bonding technology, surface modification treatment technology, tribology and other related knowledge.

Bearing ring (especially the outer ring) under alternating load and impact load, the stress it bears constantly exceeds the fatigue strength limit of the material, leading to the fatigue crack, and the crack eventually expands to a certain extent, leading to the fracture at the maximum stress of the parts.Generally occurs in the bearing area of the outer ring of the bearing, because the outer ring usually fits with the bearing box hole for clearance, and the bearing box body is a variable and elliptical part, which is easy to cause fatigue fracture under alternating load and impact load. Similar to fatigue fracture, when the stress on the bearing is greater than the tensile strength of the material, the inner ring cracks, usually due to improper installation, such as bearing installation tilt, resulting in partial load of the bearing, resulting in partial overload of the bearing caused by fracture;In addition, improper striking during installation caused bearing cracking and falling blocks, which is also classified as overload cracking.Most common interference when installation, and bearing fit size can also lead to large amount of interference of bearing ring crack (mainly has four row cylindrical bearing inner ring interference fit), interference is too big lead to inner ring stress is larger, especially thin cross section thickness (thickness of section < 12 mm) of inner ring, too much interference often leads to inner ring axial crack.